Free Shipping
Free shipping Australia wide on all products.
Push switch to suit Toyota small dash. Clean OEM fit, simple install with wiring diagram included.
GST Included
Free Shipping
Switch Function: -
Product Info
This Toyota small compatible push switch with blue LED is a custom replacement made to suit factory dash cut-outs, giving you seamless control of your 12V accessories. With dual illumination, the lower LED acts as a dash light while the upper LED switches on when activated, making it easy to see in both day and night conditions. Supplied with a plug-and-play wiring loom, it installs securely with a firm, rattle-free fit and is ideal for powering lights, winches, or aftermarket gear in LandCruiser, Hilux, Prado, and other Toyota models with small style switch openings. Built tough for long-lasting reliability, it’s trusted by DIY users and professional installers alike.
• Lower LED is illuminated for the "Dash Light"
• Top LED illuminates when switched "On"
• Please check specifications and compatibility to ensure this switch will fit your vehicle
• Green, Red and White LED also available. Click here for the full range.
• Not compatible with models fitted with 22mmx22mm switch/blank faces
Compatibility
| Make | Model | Years |
|---|---|---|
| Toyota | Landcruiser 200 Series | 2008 - 2024 |
| Toyota | Landcruiser Ute 79 Series (Right Side Only) | 2021 -2023 |
| Toyota | Hilux (Gun Series) | 09/2015 - 2024 |
| Toyota | Prado 150 Series | 2010-2023 |
| Toyota | Prado 200 Series | 2015 - 2022 |
| Toyota | FJ Cruiser (Roof Console Only) | 2011 - 2013 |
| Toyota | Hiace | 2014 - 2018 |
| Toyota | Rav4 | 2006 - 2018 |
| Toyota | Tundra | 2008 - 2012 |
| Toyota | 4Runner | 2010 - 2022 |
| Toyota | Kluger/Highlander | 2008 - 2020 |
| Toyota | Camry | 2011 - 2014 |
| Toyota | Corolla | 2006 - 2013 |
Specifications
| Specification | Value |
|---|---|
| Amps | 3A |
| Input Voltage | 12V |
| Depth | 65mm |
| Package Contents | • 1 x Blue LED Toyota Small Push Switch • 1 x Wiring Loom |
| Maximum Rating | 3A @ 12V |
| Cutout Size | 17mm (W) x 26.5mm (H) |
| LED Colour | Blue |
| Special Notes | • Strongly recommended to be wired through a fused relay • Designed for positively switched applications |
| Component Colour | Black |
Select all options above to see variant specifications
| Specification | Blue / Air Compressor |
|---|---|
| Wire size | 20AWG x 19cm |
| Face size | 22mm (W) x 33mm (H) |
| Throws | Single Throw |
| Poles | Single Pole |
| Switch function | On-Off |
| LED Colour | Blue |
Wiring Diagram
Sizing Guide
Disclaimer
Switch Boss® designs and supplies aftermarket products that are compatible with a wide range of vehicles and equipment. Unless otherwise stated, these products are not genuine or original parts from the listed brands or manufacturers. Switch Boss® products are not affiliated with, endorsed by, or sponsored by any vehicle or equipment manufacturer.
All manufacturer names, models, and trademarks are used strictly to identify compatibility, fitment, or intended use. Brand and vehicle names are included only to show which products our aftermarket parts are designed to work with.
Switch Boss® does not sell or distribute genuine Toyota, Nissan, Mitsubishi, Mazda, Isuzu, Holden, GM, Ford, Suzuki, Volkswagen, Starlink or any other branded products. Our parts are aftermarket alternatives only.
Free shipping Australia wide on all products.
All orders placed before 1pm AEST dispatched same day.
Rocker Switch to suit Toyota Small - 14 Styles
There's a lot of play in the USB part of the passthrough - the housing itself is solid, but the USB part is so loose! Been using the same cable with no issues since before I installed the passthrough, but now it's so spotty - the cable works fine but it can't stay in the proper position and just starts sliding out due to how loose the USB end is :(
Hi EL,
Thank you for taking the time to share your feedback, and I’m sorry to hear about the issue with the USB passthrough. We truly appreciate you bringing this to our attention.
We’ll reach out to you via email to assist further and take a closer look at the issue.
If you have any other questions or concerns in the meantime, please feel free to let us know
Great switch for my Prado spot lights. Easy to instal and works as expected.
This switch was absolutely perfect for the centre counsole. Great instructions and a perfect fit.
Free shipping Australia wide on all products
All orders placed before 1pm AEST dispatched same day
Massive variety of stocked products
Can't find what you need? Fast and helpful support
Expose you to deals, how to's and content before anyone else.
You can unsubscribe at any time. Read our Privacy Policy to see how we protect and manage your data.